KNX power supply 320 mA with IP interface
REG Enclosure 6 TE
Use ETS5 or newer
ETS product family for project planning and commissioning System equipment
Product type Power supply
The equipment is compatible with KNX Data Secure. KNX Data Secure prevents manipulation in building automation. A dedicated application is required for secure operation.
Intended use
Provides bus voltage for KNX devices
Connects KNX devices via IP with PCs or other data processing devices
Operates as data interface
according to DIN EN 60715 Mounts in sub-distributors on top hat rails
Product features
Output with integrated choke for power supply to the KNX bus Reset of the KNX bus
via reset button or communication object Short-
circuit
proof and surge proof No-
load safety
KNX Data Secure compliant with ETS 5.7.3
KNX IP Secure compliant with ETS 5.7.3
LED display for KNX communication, Ethernet communication and programming mode SNTP server
configuration via ETS Up to 8 connections to IP end devices, e.g. for simultaneous visualization and configuration Galvanic isolation between KNX and IP network
| standard: | AC 110 ... 240 V (± 10%) |
| Mains frequency: | 50/60 Hz |
| Power loss (max load of all outputs): | 1.4 watts maximum. |
| efficiency: | about 88% |
| standard: | 230 VDC (± 10%) |
| Rated Capacity: | 12 watts. |
| KNX | |
| KNX media: | TP 256 |
| Output voltage bus: | DC 28 ... 31 V SELF |
| Output current: | 320 mA |
| Short circuit current: | 1 A max |
| Running in parallel with the power supply: | No |
| Connect KNX: | connection terminal |
| IP communication: | Ethernet 10/100 BaseT (10/100 Mbit/s) |
| Connection IP: | RJ45 socket |
| Ambient temperature: | −5 ... +45 °C |
| Storage/Transportation Temperature: | −25 ... +75 °C |
| Relative humidity: | 93% max (non-condensing) |
| Installation width: | 108 mm (6 TE) |
| Connection Type: | screw terminal |
| solid: | 1 x 1 ... 4 mm² |
| Fine stranded wire without ferrule: | 1 x 1 ... 4 mm² |
| Twist together finely with the ferrule: | 1 x 1 ... 2.5 mm² |