KNX power supply 1280 mA
Control Module - 2021-08-24
REG Enclosure 6 TE
ETS Product Family System Equipment
Product Type Power Supplies
Intended use
Supplying bus voltage to KNX devices
Supplying DC voltage to devices
According to DIN EN 60715 Mounting on top hat rails in sub-distributors
Product features Output
with integrated choke for powering the KNX bus 30 V DC output
for powering additional equipment Potential-free signaling contact for operating and diagnostic messages for operation in systems with emergency power supply
Technical Specifications
| standard: | AC 200 ... 240 V ~ |
| Mains frequency: | 50/60 Hz |
| Power loss (max load of all outputs): | 6.4 watts maximum. |
| efficiency: | about 86% |
| standard: | DC 240 ... 250 V |
| KNX | |
| KNX media: | TP 256 |
| Output voltage bus: | DC 28 ... 31 V SELF |
| Output current: | 1,280 mA (all outputs) |
| Short circuit current: | 3 A max |
| Running in parallel with the power supply: | No |
| message output | |
| Switching voltage AC: | AC 12 ... 230 V ~ |
| Switching voltage DC: | DC 2 ... 30 V |
| Switching current: | 5 mA... 2 A |
| Ambient temperature: | −5 ... +45 °C |
| Storage/Transportation Temperature: | −25 ... +75 °C |
| Relative humidity: | 93% max (non-condensing) |
| Installation width: | 108 mm (6 TE) |
| Connection Type: | screw terminal |
| Twist together finely with the ferrule: | 1 x 0.5 ... 2.5 mm² |