KS4P I
describe
The Thunder-KS4P I is a passive subwoofer with a 2x long excursion 18" neodymium magnet woofer and 3" voice coil. The Thunder-KS4P I features 2 SpeakON NL4 connectors, allowing the use of a 2-wire or 4-wire cable to input signals from an external powered system or amplifier and route the signal to other speakers.
Specification
| general | |
| type | passive subwoofer |
| sensor | 2 x 18" neodymium magnet woofers |
| Frequency response | 30 Hz – 150/450 Hz (-6 dB) crossover dependent(1) |
| maximum sound pressure level | 141 dB (peak)(2) |
| coverage | all-round |
| rated power | 2800W peak |
| Connector | 2 x Speakon NL4 |
| Nominal impedance | 4 ohms |
| cross | DSP control, low pass @ 150 Hz, depending on preset |
| Treatments and Finishes | |
| Dimensions (WxHxD) | 1106 x 500 x 580 mm (43.5 x 19.7 x 22.8 in) (3) |
| weight | 53.2 kg (117.3 lb) |
| Material | Polyurea Coated Birch Plywood |
| color | black/white/custom RAL |
(1) With dedicated presets
(2) Calculates maximum SPL using a signal with a crest factor of 4 (12dB) measured at 1 m
(3) Includes 17 mm (0.7 in) removable rubber feet
(4) If in critical environments (swimming pool, beach, yacht..) permanent, permanent installation, we recommend further protection of the subwoofer. Contact K-array directly to discuss best conservation practices
Passive speakers require a dedicated preset loaded on the K-array amplifier.
New materials and designs are introduced into existing products without notice.