KS5 l
Subwoofer - 2022-08-22 Music Range
describe
Thunder-KS5 I is a powered subwoofer with 2x 21" cone drivers and powerful 4x 2500W @ 4Ω audio amplifier modules with built-in DSP. Dedicated K-Discovery mobile app for remote control of DSP main parameters and easy configuration Signal routing provides a user-friendly interface.
K-framework3 is a management and control software designed for professionals and operators looking for a powerful tool for designing and managing large numbers of units over wired LAN in demanding applications.
Specification
| general | |
| type | passive subwoofer |
| sensor | 2x 21" neodymium magnet woofers with 5.31" voice coil |
| Frequency response | 30 Hz – 150/450 Hz (-6 dB) crossover dependent(1) |
| maximum sound pressure level | 145 dB (peak)(2) |
| coverage | all-round |
| controller | Wi-Fi dedicated mobile APP K-framework3 is connected via wired Ethernet |
| Connector | Line In 2x XLR-F Analog / AES3 Line Out 2x XLR-M Link Analog / AES3 Speaker Out 1x SpeakON NL4 Power PowerCON TRUE TOP Network and Data 1x RJ45 4x USB-A |
| Built-in DSP | Input Gain, Routing Matrix, Delay, Fully Parametric IIR Filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), Onboard Presets, Remote Monitoring |
| cross | DSP control, low pass @ 150 Hz, depending on preset |
| Treatments and Finishes | |
| Dimensions (WxHxD) | 1140 x 590 x 850 mm (44.9 x 23.2 x 33.5 in) (3) |
| weight | 104.4 kg (230.16 lb) |
| Material | Polyurea Coated Birch Plywood |
| color | Black, white, custom RAL |
| amplifier | |
| Amplifier module | 4 ch class D amplifier module |
| Output Power | 4 x 2500W @ 4ohm(4) |
| energy consumption | 600 VA @ 8 Ω load, pink noise, 1/8 rated power |
(1) With dedicated preset
(2) Calculates maximum SPL using a signal measured at 1 m with a crest factor of 4 (12dB)
(3) Includes 17 mm (0.7 in) removable rubber feet
(4) CTA-2006 standard single channel driver